24
submitted 1 week ago by augus@ohai.social to c/gunpla@lemmy.world

30MF Dragonia Knight

Fantastic kit. The "silhouette"/base body looks good by itself, but once you put on the armor it turns into one of the coolest kits I've assembled.

My main complaint with this whole line (so far) is that I have not been able to make the eyes "glow" with silver paint behind the clear plastic.

@gunpla

#30MF #30MM #30minutesmission #mecha #plamo #modelkit #modelkits

4
submitted 1 month ago by augus@ohai.social to c/gunpla@lemmy.world

HG Gundam Mk. II (Revive)

This was a fun kit, although I'm glad I went into it knowing it needed some paint. I was surprised at how much I liked the design, since I'm not a big fan of the RX-78-2.

@gunpla

#gunpla #gundammkii #gundam #universalcentury #hguc #HighGrade #plamo #modelkit #mecha

12
submitted 3 months ago* (last edited 3 months ago) by augus@ohai.social to c/gunpla@lemmy.world

HG Gundam Barbatos Lupus Rex

This required a decent amount of paint to get it close to color accurate, but I'm happy with the result.

@gunpla

#HighGrade #gunpla #gundam #gundamibo #IronBloodedOrphans #mecha #modelkit #modelkits #plamo

31
submitted 3 months ago by augus@ohai.social to c/gunpla@lemmy.world

MG Unicorn Gundam (OVA)

This is definitely a kit of highs and lows. The pink plastic almost glows, and the silhouette is intimidating. However, the transformation gimmick causes issues with Unicorn mode and general stability, which is quite unfortunate.

@gunpla

#gunpla #gundam #mecha #gundamuc #GundamUnicorn #plamo #modelkit

17
submitted 5 months ago by augus@ohai.social to c/gunpla@lemmy.world

HG Gundam Pharact

I wanted to build something relatively unique and simple, so I pulled the Pharact. Very similar build to the Zowort (understandably). Definitely looks better on a stand than free-standing.

@gunpla

#highgrade #mecha #gunpla #plamo #modelkits #gwitch #witchfrommercury

19
Zakupla-kun DX (lemmy.nz)
submitted 5 months ago by augus@ohai.social to c/gunpla@lemmy.world

Zakupla-kun DX

This was a neat kit to build. Almost a surreal experience to clip a display runner out of an actual runner. The last image is a scan of the parts list, just to demonstrate how much goes into the display.

@gunpla

#gunpla #modelkits #plamo #gundam #zaku #gunplakun

40
submitted 7 months ago by augus@ohai.social to c/gunpla@lemmy.world

MG Char's Zaku II 2.0 (with a Sony α7 IV)

First of all, apologies to ohai for the filesize on this post.

I love the Zaku II. Probably my favorite mobile suit design, besides maybe the Barbatos Lupus. The MG Zaku II 2.0 is a fantastic rendition of the suit, and definitely worth getting.

I borrowed my friend's Sony α7 IV mirrorless camera and took some (unfortunately not bright enough) pictures in a lightbox.

@gunpla

#gunpla #gundam #universalcentury #mastergrade #modelkits #mecha #plamo

25
submitted 7 months ago* (last edited 7 months ago) by augus@ohai.social to c/gunpla@lemmy.world

[30MM] AC6 Generic Balam Melander with Weapon Set 02

More (poorly color balanced) images of an Armored Core 6 build. Well, two actually, since the last two images include my generic Orbiter with the Weapon Set 05 I put together for it.

@gunpla

#30minutes_missions #30MM #armoredcorevi #armoredcore #bandaispirits #mecha

40
submitted 8 months ago by augus@ohai.social to c/gunpla@lemmy.world

[30MM] Armored Core VI Nachtreiher / V.IV Rusty

This is one of my 3 ACs from Bandai, and the only non-generic one I have. Pictures of the others will come soon enough, although I didn't have the lighting quite right for them, either.

Fun note: right after this, one of its feet broke in 3 places. Some wire and glue has it back mostly right.

@gunpla

#mecha #plamo #armoredcore #armoredcorevi #30mm #30_minutes_missions

44
submitted 8 months ago by augus@ohai.social to c/gunpla@lemmy.world

MG Blitz Gundam

Brief story time: my first articulated "model kit" was the G-Frame Blitz Gundam. I was amazed at the simplicity and aesthetic for <10 USD, and it inspired me to get into the hobby.

Late last year I got the MG Blitz Gundam, and it is everything I liked about the G-Frame times 20.

@gunpla

#gunpla #gundam #plamo #mecha #modelkits #gundamseed

25
submitted 9 months ago by augus@ohai.social to c/gunpla@lemmy.world

HGRfV RX-78(G)E Gundam EX

Finally got some pictures of the EX with decals.

@gunpla

#gunpla #mecha #gundam #plamo #modelkits #requiemforvengeance

19
submitted 9 months ago by augus@ohai.social to c/gunpla@lemmy.world

HG Unicorn Gundam 02 Banshee Norn (Destroy Mode)

(that's a mouthfull)

I went into this kit expecting extra work, but the result was worth it. It even came with an extra shield (from the Unicorn mode?). I do wish it came with some basic beams for the sabers and tonfas, though.

@gunpla

#gunpla #gundam #modelkits #plamo #mecha #HighGrade #GundamUnicorn

[-] augus@ohai.social 3 points 1 year ago

@Walican132 Part Two:
Last one was a lot of info, and honestly Multiboard takes a bit to get into. All of those parts should get you most of the way there (although I'm using the "Legacy" version of a lot of them).

The last thing I did was add a negative cylinder to each peg or hook of the size required for the stand I was using in my slicer program.

For the Simple Stand or similar, it was a 3.85x3.85x5.2 mm cylinder on a peg. For the Action Base 5, a 6.9x6.9x6 mm one on a hook.

[-] augus@ohai.social 3 points 1 year ago

@RaspberryJam @Akaru88 RG Epyon is one of the kits I finished assembling recently. Super fun kit. Don't lose the tiny pieces like I did (eventually found it). Also the DelpiDecal waterslides for it look fantastic, if you want to spend the extra time and money.

[-] augus@ohai.social 3 points 1 year ago

@Fingolfinz I've had the website bookmarked since they announced. I'm so ready.

https://global.bandai-hobby.net/en-us/site/gundam-assemble/

[-] augus@ohai.social 3 points 1 year ago

@Akaru88 In the past 4 days I've managed to find an MG Barbatos and an RG Force Impulse Gundam in person for a decent price, so my backlog has expanded. That Barbatos may jump the queue a bit, although I need to order waterslides for it.

My gunpla posting streak was broken after only 5 days, but honestly that was two more than I figured it would be. I have precisely 0 pictures in reserve and I haven't been home enough to take any or do any building.

[-] augus@ohai.social 3 points 1 year ago

@wirelesswire I've been looking at the HGGQ Red Gundam just for that articulated Gundam Hammer

[-] augus@ohai.social 5 points 1 year ago

@TallonMetroid Yeah I honestly had assumed it was a weapon I hadn't seen yet until I read the box again. There's no way I can paint it clear, but maybe I'll do a metallic pink at some point in the future.

[-] augus@ohai.social 3 points 1 year ago

@Akaru88 Great build! Some gold Gundam Marker would make that heat hawk pop.

[-] augus@ohai.social 4 points 1 year ago

@Akaru88 That looks fantastic! Wonderful metallic color. I'd be tempted just to display it like that (although I just love Zaku and Zaku adjacent suits)

view more: next ›

augus

0 post score
0 comment score
joined 2 years ago