71
Deck Buttons Releases Real Metal Steam Deck Buttons In Our Devices - Steam Deck HQ
(steamdeckhq.com)
this post was submitted on 11 Sep 2024
71 points (98.6% liked)
Steam Deck
15047 readers
146 users here now
A place to discuss and support all things Steam Deck.
Replacement for r/steamdeck_linux.
As Lemmy doesn't have flairs yet, you can use these prefixes to indicate what type of post you have made, eg:
[Flair] My post title
The following is a list of suggested flairs:
[Discussion] - General discussion.
[Help] - A request for help or support.
[News] - News about the deck.
[PSA] - Sharing important information.
[Game] - News / info about a game on the deck.
[Update] - An update to a previous post.
[Meta] - Discussion about this community.
Some more Steam Deck specific flairs:
[Boot Screen] - Custom boot screens/videos.
[Selling] - If you are selling your deck.
These are not enforced, but they are encouraged.
Rules:
- Follow the rules of Sopuli
- Posts must be related to the Steam Deck in an obvious way.
- No piracy, there are other communities for that.
- Discussion of emulators are allowed, but no discussion on how to illegally acquire ROMs.
- This is a place of civil discussion, no trolling.
- Have fun.
founded 3 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I like the color of copper, but managing cupric oxide would be a potential headache, especially if it flakes off into the electronics (which it is likely to do on a moving part, like buttons).
You could possibly mitigate this somewhat by running the buttons through a polishing tumbler with burnishing media, but it would give me too much stress knowing that even this isn't 100% effective.
I'm pretty sure finger oils would prevent oxidation. i don't think it would be a big problem?
They don't. Take a look at pennies. The problem is that your fingers aren't only covered in oil. There's also sweat, dirt, dead skin, and bacteria.
The other issue is that even if that was true, you're not touching the entirety of the button. The sides and the underside are just exposed to air, and with enough ambient moisture, expect oxidation to show up eventually.
i don't mean to be argumentative but i haven't seen many pennies become corroded. also copper pipes in houses I've worked on have held up really well. I'm pretty sure a copper water line is more likely to oxidize via galvanic corrosion instead of moisture.
buttons on a controller seem to be at much lower risk of corrosion with respect to pennies, water lines, etc.
It's fine. I understand why you would be skeptical. I studied metalsmithing in college, so I'm pulling from my knowledge of working with raw copper and applying/avoiding patinas. It has been my experience that raw copper items that touch your skin will develop oxides eventually.
Modern copper pipes don't have that problem, because they're often covered with a protective coating from the factory to protect against oxidation (which is why you have to sand joints before soldering, as I'm sure you're familiar), and people rarely handle them after installation.
These buttons could be just fine and never develop a problematic patina, but I wouldn't personally take that risk, because ≈$500 replacement cost is high for me. Even the example image shows the characteristic blue oxides, though that could be from an intentionally-induced patina for advertising purposes.