142
Turning a mini-pc into a WiFi access point
(lemmy.world)
After a hardware upgrade I ended up with a spare mini pc. Noticed these two icons and thought I might be able to use it as a WiFi access point with VLANs using OPNsense.
Is that possible? If so, what do I even need to buy to plug into there?
I don't need it to do any fancy dhcp, dns or firewall stuff, I just need a WiFi access point with support for VLANs.
Are any of those open source? I was hoping to go the open source route
Not really. If that's a hard requirement, check out what is supported by openwrt or freshtomato.
There was a similar question a few days ago with some points about wifi adapters vs access points brought up.
https://lemmy.dbzer0.com/post/36614200
It's mostly just a strong preference, so if I can reasonably do it I'd like to. Some great info in that post, thanks for finding it!
Many devices support OpenWRT
Pick something that you like and then check support. If it is not supported there is probably a similar supported device.
Nyes?
GL-iNet devices run DD-WRT, with an added (probably not open source) web interface. However, if you ssh into any of their routers, it's BusyBox and DD-WRT. And if you click go into the admin web page and click System->Advanced you end up with a link that takes you to luci, the raw DD-WRT web UI for the device. The company's UI is just a simpler, more pretty UI on top of DD-WRT.
@sxan @elyviere In particular, there are two gl.inet models that you can install openwrt on: https://forum.openwrt.org/t/best-newcomer-routers-2024/189050/2
The other models run modified openwrt but don't necessarily allow you to install a stock openwrt release.
They run a custom version of OpenWRT. However, I would run stock OpenWRT since it is better supported.