this post was submitted on 14 Aug 2023
361 points (100.0% liked)
Technology
37738 readers
403 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
How do they know it's a bad product if they didn't bother to test it under the conditions it was designed for? It was a prototype, not a final product. In the original video, Linus is surprised (and maybe a bit upset) that the other guy didn't grab the right card or even notice that he didn't get the right card.
And to the point of the comment you replied to: it doesn't matter what the cost of the cooler was. If it was the best of the best then it was worth showing that. LTT does not seem to have a consistent viewpoint of "practicality". Even if we ignore that, saying "this product isn't worth the cost" is very different than the "useless" comment they ended up with.
The whole situation is what I like to refer to as "fractally wrong". No matter the perspective, how close or far away, it's always wrong.
Again if you are charging 800+ dollars and again to Linus' point of view he wasn't aware of the 4090 FE edition of this cooler, doesn't make sense for buyers. Most of the video they are complimenting the machining of the piece.
I don't think they ever say useless in the original video. Could you provide me a link of them doing so but gave it a quick scan via transcript and not seeing it. To me they just say its a bad product (with Linus' limited knowledge of said product).
Yes he was, he commented on it in the original video, which the GN video included.
My bad, I should not have quoted a word that they didn't use directly. But still, his final conclusion, as included in the GN video, is that nobody should buy it, and not just because of cost.
maybe I'm blind deaf and stupid but the link for that say nothing about Linus knowing about the 4090 FE edition of the cooler. Just that they used a 4090 in the original video and that was bad, which I again agree with and said he probably should have used a 3090TI.
Because its a 800+ dollar of copper for a gpu and cpu cooling. Even if it was 20 degrees lower, you are spending half of what you spent on a fucking GPU on copper (that is magnificently manufactured/milled). This is so niche its just a bad product since the tolerances are so tight as shown in the video it only works on one type of gpu and/or cpu. Like its clear Billet labs is doing fantastic work on the machining but no reasonable consumer should ever buy this. This is so unreasonable and that is the point Linus is making. Its a cool project that Billet labs is making but there is almost no practical purpose for it.
Edit: Like their business model is so niche. If anything this feels like a way to spin the company in the direction of making custom milled part for commercial entities that need custom solutions. The consumer market isn't a good market for them.