3DPrinting

23494 readers

13 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 3 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

Heated bed insulation (discuss.tchncs.de)

submitted 2 weeks ago by Rolive@discuss.tchncs.de to c/3dprinting@lemmy.world

7 comments fedilink hide all child comments

My 3D printer does not have any heat insulation on the bed at the moment. It also takes quite a while to heat up and probably wastes a lot of energy maintaining the temperature.

Is this something that makes sense to do? I would probably cover the bottom with some sort of insulating foam. I also don't want it to fall off after a while as adhesives tend to do after a while.

Is this worth doing and what materials should I use for this?

you are viewing a single comment's thread
view the rest of the comments

[–] FUCKING_CUNO@lemmy.dbzer0.com 4 points 2 weeks ago

Ive not seen anyone try that before, but interesting idea! I do think you would probably be better served by an enclosure, however. I'm sure some thermal energy is lost from the underside, but I'd guess you're losing more above the bed as heat rises. An enclosure would also allow you to print some more finnicky filaments that are sensitive to temperature changes during printing.