I’ve been working on a new ereader case platform and wanted to find a way to print bigger than the max volume, and have it extremely durable is was the result.
Need to do some more work with the cover but overall I am very happy with how this turned out.
EDIT: Forgot to mention, the clear material is TPU, and the Purple material is PETG. The holes are for Threaded inserts.
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
I have an earlier post here going over it. But this 1 print is 3 separate prints. I first print the Spine, which has alignment groves. Then I remove it from the print surface and print the back. The print will stop after the first layer so I can add in the spine which is held down with magnets. The I resume. This will print the next layer ontop of the Spine, which melts it in and creates a solid connection, no weaker than a normal TPU print. I then remove it and do the same to the cover.