this post was submitted on 11 Sep 2023
25 points (100.0% liked)

Technology

37748 readers
202 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
 

I always forget the speed differences (and other specs) for ethernet cables. I can find what I need from various sources, but I haven’t been able to find a good chart with the info I want to print out at work. Most likely I’ll create my own, but I’m curious what’s already out there.

Looks like we’re up to CAT8 now, with limit of 30meters, whereas CAT7 and lower are all 100m at their base speeds. Here’s my basic cheatsheet:

CAT5 - 100Mbps, 100 Mhz

5e - 1Gbps

6 - 1Gbps (10Gbps < 55meters), 250 Mhz

6a - 10Gbps, 500 Mhz

[2nd attempt at posting. Timed out earlier.]

you are viewing a single comment's thread
view the rest of the comments
[–] towerful@programming.dev 3 points 1 year ago

Cat 6a, and 300ft (100m).
Make sure you use the right ends (get specifically cat6a ends, as most unspecified will be cat5e).
Make sure your equipment can support 10gbps.
And make sure your equipment can power 10gbps over the 100m (some sfp+ transceivers are lower power and can only do ~20m or whatever. I imagine the same applies to RJ45 based kit)