79
submitted 6 days ago by Dave to c/homeassistant@lemmy.world

I replaced them in April. Should have had another 6 months or more but instead the charge is now at 1%... previous batteries lasted almost 18 months.

No particularly interesting history. Automations locked or unlocked it about 6 times over that 2 day period.

Not a question, just a frustration.

you are viewing a single comment's thread
view the rest of the comments
[-] roofuskit@lemmy.world 17 points 6 days ago

Two questions, what battery chemistry, and what's the temperature outside?

All batteries struggle in the cold, but NiMH have it really bad because they start at 1.2v charged instead of an alkaline 1.5v. So most devices think they are half dead to begin with. And the cold is going to make that worse.

My lock was never this bad but I now own an ostation charger with their lithium AAs and the battery life is great. The only downside is they are obviously using a buck converter to get 1.5v so there's no voltage curve to indicate when they get low, they just cut off when dead. If you rely purely on the smart features and don't carry a key as backup you'll want to set a reminder to change and charge them on a schedule so you're never locked out.

[-] RogueBanana@lemmy.zip 8 points 6 days ago

I never even realised they make lion battery in aa size. Its pretty cheap too, gonna buy a bunch of them soon.

[-] SkaveRat@discuss.tchncs.de 8 points 6 days ago

just be careful what you use them with

Some brands have unusual voltage graphs over the battery life, which can confuse devices that rely on the alkaline/NiMH voltage drop to detect if they are low on power

Some of the lithium ones set their voltage to a fixed value and abruptly die when they run out. This is especially problematic for devices like smoke detectors, as they can't notify you if they are running low

[-] RogueBanana@lemmy.zip 4 points 6 days ago

I did some research comparing them but I think I am gonna stick with usual nimh batteries for my use case. Unless the device is very picky about voltage level, NiMh seems to be recommended over Li ion, for battery life and cost ig. Maybe I will get 1 just to test it out, some claim to have a proper voltage drop but I am sceptical. Quite annoying how hard it is to find good ones outside of Amazon -_-

[-] SkaveRat@discuss.tchncs.de 5 points 6 days ago

They are great for stuff that you'd regularly recharge with NIMH. Things like game controllers etc

Longer lasting use cases don't benefit much (see the latest technology connections video on the topic)

[-] Dave 7 points 6 days ago

I haven't taken it apart to replace them yet so not sure what batteries are in it. I used to use rechargeables but haven't the last couple of times as they don't last very long in comparison. Is there a type of battery I should be looking to replace them with?

We are heading into summer here. The last couple of days have probably been only 20C but some days they may have 30C temps when the door is in the sun.

Is this your charger? I didn't even realise such a thing existed, I might ask Santa for one for Christmas!

[-] roofuskit@lemmy.world 4 points 6 days ago

Yes! That is what I have and I absolutely love it least fiddly charger experience ever. Just drop them in any old way and there's always charged batteries in the bottom tray. And also I used a Christmas gift card to buy it.

But if that's overkill they make a regular sized more traditional 4 battery charger that also works with their lithium batteries. But I really am a fan of the full ostaton.

Be warned they don't make lithium AAAs so the ones bundled are just NiMH. Only the AAs are lithium. I got the one without the screen that you linked and the freaking thing has WiFi and Bluetooth so it's now integrated into my Home Assistant instance. ๐Ÿ˜† A battery charger.

You can find the integration on HACS/Marketplace

[-] ignotum@lemmy.world 4 points 6 days ago

Oh wow, i saw a guy DIY something like that charger, but i didn't know it existed as a proper product, now i want one too

[-] roofuskit@lemmy.world 3 points 6 days ago

I think I know the exact project you're talking about, I was actually considering building one when I heard about the original ostation. So glad I didn't DIY one.

[-] Dave 1 points 6 days ago

Haha that's awesome! I am totally going to investigate this a bit more, maybe I'll buy it for myself for Christmas! Unfortunately I am pretty sure the door lock takes AAA so it might not help my immediate problem if they don't do lithium AAAs.

this post was submitted on 12 Nov 2026
79 points (98.8% liked)

homeassistant

21299 readers
4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago
MODERATORS