Aotearoa / New Zealand

1656 readers

31 users here now

Kia ora and welcome to !newzealand, a place to share and discuss anything about Aotearoa in general

For politics , please use !politics@lemmy.nz
Shitposts, circlejerks, memes, and non-NZ topics belong in !offtopic@lemmy.nz
If you need help using Lemmy.nz, go to !support@lemmy.nz
NZ regional and special interest communities

Rules:

Don't be a dick

FAQ ~ NZ Community List ~ Join Matrix chatroom

Banner image by Bernard Spragg

Got an idea for next month's banner?

founded 1 year ago

MODERATORS

Dave

RaoulDuke

We've got an insulated house, heat it properly, ventilate it, but still see humidity levels of 70%+ in bed rooms. How to fix that? (self.newzealand)

submitted 1 year ago by sylverstream to c/newzealand

95 comments fedilink hide all child comments

We built a house 7 years ago and it's insulated and has double glazing. I've installed Home Assistant with temp sensors in the bed rooms and seeing 70%+ humidity levels. Temperature is always above 16c

We ventilate it, but still it's 70% in the bedrooms. WHO recommends 40-60%, so we're a bit worried.

Living room is around 55% during the day when we have the heat pump set at 21c.

As it's pretty humid outside I think it's almost impossible to get it lower, but are there any other tips? I don't want to run dehumidifiers. Would an HRV like system help?

you are viewing a single comment's thread
view the rest of the comments

[–] sylverstream 2 points 1 year ago (7 children)

Just to add, it IS very handy. I've just created a script that sets the heat pump to Dry & 2c lower than ambient temperature.

This way I will be able to create automations to e.g. run it on Dry every night for e.g. an hour, then back to heat, etc.

[–] Dave 2 points 1 year ago (6 children)

This sounds like a rabbit hole I'd like to get lost in. Except when I'm away and no one else can use anything because I stupidly started an update just before I needed to leave and it broke things and now nothing is working.

[–] sylverstream 2 points 1 year ago (5 children)

Yep, try to do small things first instead of letting hell go loose if something doesn't work.

I've set up a tablet in the living room as "wall panel" where e.g. the kids can change the thermostat for their bedrooms, check the weather forecast, and it shows random photos from the NAS as a screensaver, which is just fun & nice.

[–] innercitadel 2 points 1 year ago* (last edited 1 year ago) (1 children)

What is something simple to start with if getting into HA? I already have a NAS.

[–] sylverstream 2 points 1 year ago (1 children)

I started with:

Integrate my web cams using Frigate, showing up in HA and sending notifications when I'm not home. HA knows if I'm home.
Added zigbee temp sensors and smart plugs to bed rooms to control electrical heaters as thermostat.
Motion sensor and smart bulbs in the hall way. Of all the things I've done, this is the thing my SO keeps raving about.
Control my rm mini 3 Ir blaster, for my heat pump, tv and sound bar. So eg thermostat for heat pump and universal remote for TV/audio

Next to do is put smart plugs in our electric blankets, make our dumb alarm smart and make the garage door smart.

You can run it dockerized to get started.

[–] innercitadel 2 points 1 year ago (1 children)

Oh cool. I'm going to try the temp sensors. Thank you!

[–] sylverstream 1 points 1 year ago

Enjoy. It's a rabbit hole, I've just spent hours googling for a Zigbee IR blaster that's compatible with ZHA, and there's none. Zigbee2MQTT has better compatibility but I don't want to convert my Zigbee network to Z2M at the moment.

load more comments (3 replies)