this post was submitted on 23 Jan 2024
1563 points (99.2% liked)
3DPrinting
15625 readers
214 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Depends on what you mean by stable.
It's likely dust in the port. If you gently clean it out with a toothpick or other small flat instrument you will get it to seat better. If dust is the issue, you should see some lint at the bottom of the port.
Sorry for not being clear, I'm not talking about connection stability, I mean the type-c port (female) becomes flimsy over the years and doesn't hold the connector (male) securely anymore
Neither are they. If there's dust or fuzz down in there, it doesn't physically seat correctly, and ends up being wobbly.
This isn't usually the cause. If the cable isn't inserting fully then yes it can be dust and that often helps the problem, but the retention mechanism itself wears out over time leading to the cable slipping out easily and depending on the design things can get wobbly. I work with electronics for a living and with laptops more often than not it's the latter category with dust not being too common of an issue since they aren't kept in pockets. Phones on the other hand it's usually dust, but I don't interact with many USB C phones old enough for wear to be an issue.
Have you tried a different cable? With usb c it should be the cable that becomes flimsy and not the port.