Easiest way to create player targets for Music Assistant to connect to an active speaker via SPDIF for <$30 ? Squeezelite seems like a good candidate, but unsure how to connect to SPDIF (self.homeassistant)

submitted 2 years ago by sylverstream to c/homeassistant@lemmy.world

7 comments fedilink hide all child comments

I'm struggling to find the easiest solution to connect a set of active speakers that have BT/Optical (Toslink)/Coax. I currently use a tablet to stream Deezer via BT, but I want to be able to use them in Music Assistant. I tried Bubblepnp on the tablet, but it's too slow for that, it wasn't reliable.

I don't want to spend 100s of dollars on e.g. Sonos stuff. I see Squeezelite as a good option, but I'm unsure how to connect an SPDIF speaker. The docs say you can connect to one of the pins. Do I just cut the plug of an SPDIF cable and then connect to it?

I don't have a 3D printer, ideally I want a box around it.

Ideally there's an out-of-the-box solution. Any tips or help appreciated.

you are viewing a single comment's thread
view the rest of the comments

[-] sylverstream 4 points 2 years ago

Thanks for the long reply! I've tested Fully Kiosk again and now it seems to work perfectly. Previously it was not reliable, guess they have fixed it.

this post was submitted on 10 May 2024

24 points (100.0% liked)

homeassistant

20656 readers

6 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world