[-] inquanto@lemmy.world 10 points 6 days ago

Hey,

Many the things you're feeling, I felt too when I was your age. Off course things might be very different, depending on the country you live in and the culture there, but still I think there are things that apply to people everywhere.

First off I would try to dismiss the idea that life can be planned or figured out, or that you should know what to do with it. Of course its nice to have goals and dreams but the older I get, i realize that all the older people I thought had it figured out are just making it up as they go too. Looking at former classmates now, I was always jealous of the ones that knew exactly what they wanted to be whereas I didn't really know and still don't. But many of them pursued those dreams only to find themselves somewhere completely different, so don't worry about that.

Getting a job, even a bad one is not necessarily as bad as you might think. The upside being that they often attract a lot of other people your age who are going through the same thing. So even if the work might kinda suck, you might have more fun than you think and meet a lot of people. And even a little financial independence can feel very good.

I would also very much encourage you to find hobbies you like. There are many things that you can do on a small budget, and since you're posting here you have access to the internet and a wealth of knowledge that comes with that. Personally I enjoy photography, and you definitely don't need fancy gear to do that. I also enjoy sewing and woodworking. In general anything creative where you can see the result of your effort can be really satisfying. Don't make it about being the best or making it your career. Do it for yourself. Often we feel pressure to accomplish things by society or our parents etc. but don't underestimate the pressure and expectations you might put on yourself without knowing.

Having a hobby and achieving something there can give you a lot of pride and satisfaction that will make you worry less about all those other things. Its also a great way to meet other people too.

Another thing I wouldn't underestimate is exercise. Try not to focus about looks or worry about your body but the tiredness after exercise is also a great way to feel accomplishment and to see a progress when you might feel like you're standing still elsewhere. Also a healthy body will give you more energy to tackle other things.

I know a lot of this advice is a bit generic and easier said than done, but in general Id just advise you to give things a chance and try as many things as possible without worrying about what comes next. Its a bit like hiking lokking at the mountain on the horizon us very daunting, but just walking is not that hard and no matter which road you take after a while you will look back and see the place you started as far away as that mountain.

The main thing I've experienced in life so far is that I would never have predicted where I would end up next and that things change all the time. As much as you think you know yourself, what you can and cant do or whats realistic for you to achieve, you are probably wrong and will be surprised 10 years from now.

I hope that helps and I wish you all the best!

[-] inquanto@lemmy.world 9 points 1 week ago

I have an LG C3 that I never connected to Wifi or plugged an ethernet cable into. I only use it with my nvidia shield running lineage OS, am I still affected by this / anything I should do?

31
submitted 1 month ago by inquanto@lemmy.world to c/ece@lemmy.world

So i have these Rode Wireless Microphones at Work that you connect to your phone with a USB-C cable. Thing is the cable they ship with is absolute trash and breaks after about 3 uses. So i got the idea to try and build a 3d printed thingie with a protruding usb-c port that you could slide onto your phone sort of like the old iphone music docks. Then on the back you could slide in the rode receiver, thus eliminating any cable twisting. I thought this would be easiest if i had the pictured usb-c breakouts, because they have mounting holes that i could fix firmly into the 3d printed part. I picked a 24 pin version thinking this would cover all the necessary usb-c specs to get at least something like a usb 3.0 connection as I don't think the rode mics need super high data transfer or power delivery above 5v. Alas the pictured "cable" didn't do the trick and the mic wasn't recognized by the phone. So I'm wondering would it even be possible to build something like this with breakouts or am I missing things. Do usb-c cables usually have chips that negotiate voltage and transfer specs between devices? Am i missing shielding, or is my wire gauge totally off?

I can probably still build a mic holder thingy using a short premade silicone cable, but I'm still curious if this setup could work in theory or if there are other breakouts that could make this work.

Thanks for your help!

[-] inquanto@lemmy.world 12 points 1 month ago

+1 for Qobuz.

I have my own media server where i host everything that I buy digitally in the qobuz store to support artists and I use the streaming part to discover new things , or at parties etc. Its not the cheapest, but that's kinda contradictory to supporting artists anyway. Its a good combination since a subscription gives you a bit of a discount on digital purchases as well.

[-] inquanto@lemmy.world 5 points 2 months ago

To each his own I guess, but seeing the main character experiencing complex emotions and forming a connection to them as a viewer is not "nothing happening" to me..

[-] inquanto@lemmy.world 13 points 2 months ago

I hate how its now a thing that shows can get criticized as "to slow" just because people fucked up their attention span. I was not bored for a single second of that show. Meanwhile Marvel movies might have shit happening every second but god have I been bored during those stake less, CGI fight scenes..

[-] inquanto@lemmy.world 8 points 3 months ago

I think animal welfare is the bigger factor for most people avoiding leather, and while artificial leather is just plastic and certainly not great environmentally, traditional leather production is also very very much polluting nature with chemicals (Chromium tanning etc. ) plus it still supports the whole factory farming system which is terrible in its own right. I'm hoping fungus based leather or some lab grown variant will bring a real alternative someday.

[-] inquanto@lemmy.world 10 points 3 months ago

The only time this makes sense, is if they have a whole digital order thing going, not saying that I like that, but then at least its consistent. What I hate most is if the fucking qr code is just a link to their website, and not even the menu section. Might as well have a sign on the table that says "just google it" or something...

[-] inquanto@lemmy.world 29 points 6 months ago

Funny for me it was RDR2. I still think I probably would have liked it if I stuck with it, but 20 minutes in I was told that I would have to regularly clean my gun and hunt to feed my camp etc. and it just felt like doing a bunch of chores and I noped straight out.

[-] inquanto@lemmy.world 5 points 8 months ago

Just looked up Onlyoffice and the first banner on their site now reads: Now driven by AI-Powered virtual assistants and smart agents... God damnit..

[-] inquanto@lemmy.world 4 points 2 years ago

Thanks for the tips, i have some extra boards so maybe i can just practice a bit with the jointer and get a better result, the bench plane also seems like a good option. Though I'm still confused why the tracksaw and parallel guide also gave me the hourglass shape. In the past I used that setup on plywood for similarly long cuts with better results..

21

I'm trying to do my very first table top out of hardwood but it proving to be quite the learning curve. I acquired a small benchtop jointer and a lunchbox type thickness planer and I've more or less successfully made my boards. What I'm struggling with now is getting a nice glue up without gaps. My first try turned out so so, and i was afraid i didn't use enough glue so I re ripped the joints with my tracksaw. I think my boards are evenly thick but they seem a bit hourglass shaped if that makes sense. They'reb about 170cm long and they join up on the ends, but there's about a 1mm gap towards the middle on some joints and its too much to squeeze all the gaps together on the panel. I first tried jointing on the benchtop jointer but got horrible results with the small bed. (Could also be lack of skill as this is all new to me). I then went with a tracksaw and parallel guides instead,which is better but still giving me a bit of a gap. So I guess im asking how more experienced woodworkers would proceed.

Would it help to glue up two boards at a time so there's maybe enough strength in the clamps to squeeze the gap shut. Or should i rip the bigger boards down so they all fit upright in the thickness planer and try to get two really parallel sides that way? I have rollers to extend the beds of both the thicknesser and the jointer but have had better results with the thicknesses. Is there something else I'm not thinking of?

[-] inquanto@lemmy.world 20 points 2 years ago

I drink it all the time and see it quite the other way round, taste has improved so much in the last ~4-5 years and while maybe not identical, I see it more like oat milk where you get used to a certain taste and then you dont miss cow milk at all. Now I get to drink a cold beer after sports which is just as refreshing, has lots of electrolytes and i dont have to worry about my liver or becoming an alcoholic..

[-] inquanto@lemmy.world 6 points 2 years ago

This might not be everyones opinion but my recommendation would be to get a plunge saw as your first tool. For me it was a big revelation that everything I built in shop class looked so terrible because we werent allowed to use power tools. Cutting a straight line with a hand saw is a skill that needs a lot of practice, same for joinery with chisels etc. But a plunge saw with track will give you very straight cuts for not so much money. And IMO it can do everything a table saw can do, just not as quickly (repeated cuts etc.) But on the other hand I think it makes more sense to get a decent plunge saw that you can keep for years and still use for breaking down sheets even when you decide you prefer a table saw rather than buying a cheaper job site table saw that you outgrow after a couple of years.

view more: next ›

inquanto

0 post score
0 comment score
joined 2 years ago