[-] CameronDev@programming.dev 2 points 4 hours ago

At least for the ticket situation, some of your anxiety may just be the unknown of it all. Once you come out the other side of the experience you may find that next time it doesnt phase you as much.

I got ticketed for a bug in my states public transport ticketing system. I could demonstrate the bug, but the internal review refused to acknowledge it, and I was forced to go to court to avoid the fine. That experience was very anxiety inducing, because I had no prior experience with the court system, and I had no idea if I was gonna face a far worse fine if they didnt side with me. Fortunately they did, but as a result, I'm much more comfortable going to court for these things, because it became clear to me that the courts really don't care for minor things like public transport tickets, so as long as you are reasonable, you'll win.

With your situation, if you have proof you had a ticket and evidence of a history of paying for tickets I suspect if you push hard enough it'll get dropped eventually.

Good luck :)

[-] CameronDev@programming.dev 1 points 5 hours ago

It is the high density of the x, not y phrasing, and that most of the article is just waffling. I might be wrong, but IMO, that was pure AI slop.

[-] CameronDev@programming.dev 10 points 6 hours ago

The new cameras are not announced, not spec'd, and not dated. There is no model name, no sensor, no price. What the company is describing is a direction, not a product you can buy.

That was what triggered me.

I'm sure fstoppers used to be a reputable source, so its kinda disappointing.

[-] CameronDev@programming.dev 0 points 6 hours ago

The vast majority of web browsers run JS, any browser that doesn't run the JS, and therefore doesn't hit the fingerprinting endpoint, is defacto fingerprinted.

[-] CameronDev@programming.dev 16 points 9 hours ago

Urgh, that site is full AI slop.

[-] CameronDev@programming.dev 2 points 9 hours ago

The one I got even came with a motherboard 24 pin adapter to turn on the ATX PSU, so I was very happy with that. The manual is Chinese only, but the only real gotcha was that there is two USBC ports, you want to use the one on the far side of the power connectors, thats the thunderbolt port.

[-] CameronDev@programming.dev 1 points 15 hours ago

I am not really qualified to comment on the quality of the handhelds, but have a few baofengs (don't know the model), a quangshen uv-k6 and a radtel rt-470x. All of them likely illegal, probably excessively spectrally noisy. But they are good for road trips.

[-] CameronDev@programming.dev 1 points 15 hours ago

Thats wild, why would anyone want a gt1030 egpu...

Is the enclosure large enough for a full size GPU?

[-] CameronDev@programming.dev 5 points 21 hours ago

PCI or PCIe? They are different, so make sure you get the right thing.

PCIe thunderbolt cards can be found on aliexpress for $70-100 AUD.

I have this one:

https://a.aliexpress.com/_mLsmPzv

You need to have a thunderbolt port (not the same thing as USB, check your device specs), and you need a power supply, I use an old PC power supply.

[-] CameronDev@programming.dev 9 points 1 day ago

https://haveibeenpwned.com/ - you may need to wait a bit for them to add the latest leaked datasets.

Change passwords never hurts.

[-] CameronDev@programming.dev 5 points 1 day ago

Not certain, but that sidebar might be github account contributors, and the commit "contributors" may not have github accounts.

[-] CameronDev@programming.dev 7 points 1 day ago

What's your cutoff for too old? Is an 80yo in good shape who could reach 100 too far gone? What about terminal cancer patients?

3

Hi All, I just got a P100, and although it appears to work, i cant quite get gemma4 to run on it properly.

My setup is:

  • Ubuntu 22.04 VM
  • PCI passthrough the GPU (Connected via thunderbolt) (I know this is unideal, and I might try cut this out later)
  • Nvidia 580 driver installed.
  • llama.cpp built from source, with cuda enabled.

I got some mostly normal output from qwen, but whenever I try to load gemma4 I get a lot of <unused49><unused49><unused49><unused49>. I did have it briefly working, no idea what changed, but reboot and its back to unused spam.

Anyone hit this before? Ideas on what I should try change?

15
submitted 1 month ago* (last edited 1 month ago) by CameronDev@programming.dev to c/diy@beehaw.org

Top comes out on the roof:

Not sure what happens below. Haven't gone under the house to inspect. Seems like a vent that travels through the wall space, but unclear why it would do that.

Any ideas what its purpose is?

1

How could Dan do this to us?

11

This user account has a RTL username, and the timestamp is getting placed inside the name.

31

Hi All, I have a Sony A9, which I have been using for Aurora photography. The last time I went out, I shot at 6400iso, 2s exposures, and nearly all of the photos I got have a ton of "stuck" pixels. See the video, skip halfway in, and look at the rocks in the bottom right.

I have had a play with the the camera with the lens cap on, and at low isos, there are no stuck pixels, it's only once I go past 640 (the second iso range) that the issue appears. Has anyone seen this kind of thing before? Is it repairable? I'm guessing most of you shoot at iso100, but for aurora it was nice to get the shorter shutter speeds.

35

Congrats to everyone who took part, and thank you to everyone who contributed here, in the solutions and visualization threads.

If anyone knows of a similar event that runs during the year, please do reach out, I would be happy to run more events like this.

Happy new year!

39

Every year, I grab my camera and head out to try take a photo of a firework. Every year I get a blurry mess of poorly exposed photos. This is the best one I got this year.

1
0
submitted 8 months ago* (last edited 8 months ago) by CameronDev@programming.dev to c/openwrt@lemdro.id

Hi all, I have a Netgear D7800 that I have run openwrt on for a long time. Does anyone else have one (or similar) and how do I get sysupgrades working? They error out when I upload a sysupgrade image, with an error about unsupported partition layout.

But as far as I can tell, I have a v2.0 layout, as I flashed a factory openwrt image manually. Is sysupgrade just not supported at all anymore (and if so, why do the images still exist?), or do I need to do something to reenable it?

16
Merry Christmas! (programming.dev)

Just letting everyone know that I'll post the final leaderboard new years day, so get your final solves in over the new few days!

14

Day 12: Christmas Tree Farm

Megathread guidelines

  • Keep top level comments as only solutions, if you want to say something other than a solution put it in a new post. (replies to comments can be whatever)
  • You can send code in code blocks by using three backticks, the code, and then three backticks or use something such as https://topaz.github.io/paste/ if you prefer sending it through a URL

FAQ

16

Day 11: Reactor

Megathread guidelines

  • Keep top level comments as only solutions, if you want to say something other than a solution put it in a new post. (replies to comments can be whatever)
  • You can send code in code blocks by using three backticks, the code, and then three backticks or use something such as https://topaz.github.io/paste/ if you prefer sending it through a URL

FAQ

view more: next ›

CameronDev

0 post score
0 comment score
joined 3 years ago
MODERATOR OF