464
submitted 1 year ago* (last edited 1 year ago) by Ek-Hou-Van-Braai@piefed.social to c/selfhosted@lemmy.world

Here's a full write-up on the first year of my Home-Lab: https://piefed.social/post/1002037

Since then I've now added networking and a self built 10" rack, I was undecided between MikroTik and UniFi but ended up going UniFI and I'm quite happy.

Building the 2020 Aluminum profile 10" server rack was a lot of fun and I learnt a lot of lessons along the way like:

  • Cutting perfectly straight with a hacksaw is a bitch and nearly impossible (or at least for me) would not recommend.
  • Buy a table/mitre saw or have them pre-cut
  • Tapping threads yourself is a lot of fun, and I would recommend doing it yourself, worked perfectly every time.
  • Bolt length and head size matters, even 1mm matters (that's what she said)

It's janky I know, but I love it and it's a lot less Janky than when everything was just on my desk

Next step for me would be to buy a 3D Printer (Sovol S6 Plus Ace) and print custom racks for everything

Shout out to https://www.motedis.com/ for the Aluminum parts, they can cut and tap all the parts to your desired length if you don't want to bother with that, but that's half the fun (and frustration)

top 46 comments
sorted by: hot top new old
[-] DandomRude@lemmy.world 55 points 1 year ago
[-] ACbHrhMJ@lemmy.world 47 points 1 year ago

Hey, nice rack.

[-] beeng@discuss.tchncs.de 36 points 1 year ago

Thought it was so much bigger until I saw thoss HDDs 😀

[-] Ek-Hou-Van-Braai@piefed.social 24 points 1 year ago

Here's some things for scale (AA Battery)

[-] Valmond@lemmy.world 14 points 1 year ago

It's new 14" drives

[-] blinfabian@feddit.nl 12 points 1 year ago

dude i thought that thing was the size of a closet😭😭

[-] bigboismith@lemmy.world 8 points 1 year ago

Oh yeah, it's on a table, not the floor

[-] HelloRoot@lemy.lol 14 points 1 year ago* (last edited 1 year ago)

This is so fucking awesome! Congrats on the build!

It’s jankey I know

if this is jankey, my 10" rack belongs in the landfill

Do you have any interesting plans to do something against the future dust buildup?

[-] uhmbah@lemmy.ca 14 points 1 year ago

I disagree, not jank.

I have the same duck.

Nice job OP. Thanks for posting. I'm going to do the same.

[-] ace@lemmy.ananace.dev 9 points 1 year ago

I absolutely love that zip-tie mounting solution, it's the kind of thing I wish I saw in more homelab setups.

[-] Ek-Hou-Van-Braai@piefed.social 2 points 1 year ago

Thanks I love the jank, one day it's going to be all neat and tidy and I'm going to miss the mess that it used to be, it adds character.

[-] Mr_Dr_Oink@lemmy.world 9 points 1 year ago

Thats awesome. And really tidy, ive only just started making something like this and it already looks like this:

Looks much more professional than mine, I just built my case from wood added room for enough disks and placed it into a kitchen cabinet.

And it's a nice touch fastening the disks with zip ties.

[-] ohshit604@sh.itjust.works 6 points 1 year ago* (last edited 1 year ago)

Was eyeing a 52Pi rack for a good little while this post inspired me to get one, but then I saw the shipping cost.

[-] Ek-Hou-Van-Braai@piefed.social 3 points 1 year ago

Ooof that is rough!!

If you can make your own like I did I would highly recommend it.

If you have the Alu tubing cut and threaded for you most of the work is done

[-] ohshit604@sh.itjust.works 2 points 1 year ago* (last edited 1 year ago)

If you can make your own like I did I would highly recommend it.

Honestly I could, metal fabrication comes in handy, get it shop issued and laser or water cut send it through the machinists, I would have to supply the material myself which would be difficult but certainly doable.

I’ll have to consider this! By chance do you have drawings or dimensions of your rack as a starting point, looks like you’re using Aluminum HSS for the frame? Completely understandable if you rather not share the details,

[-] Ek-Hou-Van-Braai@piefed.social 2 points 1 year ago* (last edited 1 year ago)

I'm more than happy to share. If others didn't share I wouldn't have been able to do my hobby.

So basically I just kinda copied this:
https://www.darkrym.com/posts/2025/05/my-rack-setup-2020-extrusion-diy-mini-rack/

The biggest difference is I used different corners, and I made mine a bit deeper (28cm total, so that it would fit a 30cm 3D printer bed)

[-] blimp@lemmy.world 6 points 1 year ago

Nice build. We use a lot of aluminium profiles at work for prototyping. We also have a mitre saw ;)

You can also have polycarbonate panels made for cheap to have a more finished appearance at the cost of ventilation and ease of access.

[-] Ek-Hou-Van-Braai@piefed.social 2 points 1 year ago

Thanks yea that's the plan I'll add those to the side and something on top later on.

Either that or I'll 3D print a honeycomb mesh

[-] HairyHarry@lemmy.world 6 points 1 year ago* (last edited 1 year ago)

How stable is this rack? Would that be a good frame for building a 3d printer table?

[-] porksnort@slrpnk.net 10 points 1 year ago

Extruded aluminum of that type is insanely stable and easy enough to build for a reasonably handy person.

You only need a cheap cutoff saw and a drill, or you can order pre-cut and ore-drilled pieces to order.

There are a number of makers of extruded aluminum building systems, basically tinkertoys for adults. I have personal experience using 80/20 and the Tslots brands. They are functionally identical.

I have used it to build stands for heavy equipment like ultra-cold freezers for labs. It is more than sufficient for any server racking.

[-] TheJesusaurus@sh.itjust.works 6 points 1 year ago

My old FDM printer frame and I think most are made of extruded aluminium exactly like this. Extremely sturdy and can be adjusted very finely with machine screws

[-] Ek-Hou-Van-Braai@piefed.social 5 points 1 year ago* (last edited 1 year ago)

I'm pretty sure I can stand on it without issues, if I add some corner plates it would be even stronger.

But when in doubt you can always go for 3030 or 4040 which would be really strong, you can probably park a motorcycle on those

[-] Monument@lemmy.sdf.org 2 points 1 year ago* (last edited 1 year ago)

I have an FDM printer (Ender 3 clone) that is mostly 2020 aluminum extrusion as the frame. A few years ago I found some 2020 on sale and built a set of shelves for my wife’s plants out of it. (Now - I know. It’s not the most economical use of materials, but it was the middle of winter, and I didn’t want to go work in the garage. Plus the 2020 was on sale.) It’ll support a slew of plants over a 4-foot span (~1.2m) without any sagging or other concerns. It can be wobbly side to side, but that’s a matter of bracing and connectors.

[-] GreyEyedGhost@lemmy.ca 3 points 1 year ago
[-] Monument@lemmy.sdf.org 2 points 1 year ago

I know. I was just seeing if you would notice. awkward laughter

(But thanks, I was trying to wing the conversion and started off with 3.3ft =1m and then did the numbers meme while my fingers typed gibberish.)

[-] Sliversun@lemmy.world 5 points 1 year ago

Damn thats a clean setup 🔥

[-] Snafucode@lemmy.world 5 points 1 year ago

Good work man, that's a nice setup. Loving the custom frame.

[-] mrgoosmoos@lemmy.ca 5 points 1 year ago

tapping threads is fun

oh buddy you gotta put the disclaimer of "in soft materials" on that, it's not much fun on steel even with buckets of lube

[-] yo_scottie_oh@lemmy.ml 4 points 1 year ago

That's pretty slick.

What are the HDDs plugged into? Would you mind posting some photos of the back?

[-] Ek-Hou-Van-Braai@piefed.social 4 points 1 year ago* (last edited 1 year ago)

Right now the back is literally empty, I'm planning on moving all the power cords there soon.

The HDDs are plugged into the ODROID H4+ (the thing that looks like a PSU)

Check my linked post and you'll see what I'm talking about

i like how your hdds just chilling there.

[-] bulwark@lemmy.world 4 points 1 year ago

Congrats on the setup. Is that proxmox I see in the background?

[-] Ek-Hou-Van-Braai@piefed.social 2 points 1 year ago

Jip everything is running in proxmox, except Home-Assistant I moved that to bare metal

[-] overload@sopuli.xyz 3 points 1 year ago

Not that jank, it looks great.

[-] Railcar8095@lemmy.world 3 points 1 year ago

How/to what are the drives below connected to?

[-] Ek-Hou-Van-Braai@piefed.social 3 points 1 year ago

They are connected to the ODROID H4+ mini PC above with SATA

[-] Railcar8095@lemmy.world 1 points 1 year ago

How did you connect a 3.5 externally? Sata to mini PC and power from the PSU?

[-] Ek-Hou-Van-Braai@piefed.social 1 points 1 year ago* (last edited 1 year ago)

The thing that looks like a PSU is actually a ODROID H4+ it has 4 SATA and power connectors, so I just power it from that.

It's all in excruciating detail here: https://www.hardkernel.com/shop/odroid-h4-plus/

You can also have a look at my old post: https://piefed.social/post/1002037 that might give you a better idea.

[-] Thorry@feddit.org 3 points 1 year ago

A table saw is for lengthwise cuts, for cutting long things like these you need a cut-off saw.

Fun fact, you don't really need to tap soft aluminium like this. You can just drive the bolt straight in with an impact driver. I thought it was sketch at first, having always tapped them beforehand. But my buddy said it's a waste of time, just drive the bolts in right away. So I tried it and he was right, it works perfectly every time. They form perfect threads so you can easily remove and re-add the bolt just like when it was tapped beforehand.

[-] bluGill@fedia.io 4 points 1 year ago

I have enough of a machinist background to doubt the threads are anywhere close to perfect. However if you are saying more than good enough I will agree.

[-] Fuck_u_spez_@sh.itjust.works 4 points 1 year ago

I'd think they would at least need to be self-tapping sheet metal screws but that an impact driver could surely strip the holes just as fast as it threads them.

[-] ohlaph@lemmy.world 2 points 1 year ago

It's perfect!!!

[-] root@lemmy.world 2 points 1 year ago

Fully custom? Sick! Where do I get one? 😅

[-] AlteredEgo@lemmy.ml 2 points 1 year ago

Nice! I want to build a rack too but want to fit a regular ATX board to fit older / cheaper hardware. So it has to be at least 304mm wide, probably 400mm

[-] Fizz 2 points 1 year ago

Thats a beautiful rack

this post was submitted on 10 Oct 2025
464 points (98.7% liked)

Selfhosted

63939 readers
728 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

Detailed Rules Post

  1. Be civil.

  2. No spam.

  3. Posts are to be related to self-hosting.

  4. Don't duplicate the full text of your blog or readme if you're providing a link.

  5. Submission headline should match the article title.

  6. No trolling.

  7. Promotion posts require active participation, with an account that is at least 30 days old. F/LOSS without a paywall has exceptions, with requirements. See the rules link for details. Tags [CBH] or [AIP] are required, see the links in Rule 8 for details.

  8. AI-related discussions and AI-involved promotional posts have additional requirements for tagging, as noted in Rule 7 and the AI & Promotional Post Expanded Rules post, and find example disclosures here.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 3 years ago
MODERATORS