Bluewing

joined 2 years ago
[–] Bluewing@lemmy.world 3 points 11 hours ago

Anyone who hasn't had to go fishing for a "lost" condom on occasion either lives in the mother's basement or seldom has sex that needs the use of condoms. Or perhaps both.

My wife still swears our 3rd daughter was the result of a lost trojan condom.

[–] Bluewing@lemmy.world 0 points 11 hours ago

You can tell it's AI because they left out the part about the majority of olive oil is aduterated with cheap vegetable oils.

[–] Bluewing@lemmy.world 2 points 12 hours ago

The only distro I recognize on their list of systemd-free distros is PCLinux. I actually used it for a bit a long time ago. Not a bad distro, but not a great one either. So I moved on.

[–] Bluewing@lemmy.world 4 points 12 hours ago

I know. My simple criteria is pretty simple: Does my computer boot and show me pretty pictures of kittens after it boots. If it does, I do not care.

[–] Bluewing@lemmy.world 1 points 12 hours ago

While I do NOT condone what he did and tried to further his control, I do not think he was all that wrong about places like Lemmy often being a circle jerk of rage and hate. It's the nature of humans to fall into tribes and hate on others that they see as not thinking properly or differently. And places like reddit and lemmy encourage that behavior naturally.

[–] Bluewing@lemmy.world 2 points 12 hours ago (1 children)

I do have some time to celebrate this accomplishment today. So yes, I am ecstatic about it. I would be dancing even as I type, but I literally have knee surgery at 9:45 tomorrow morning. So it's going to be a few days before I can dance again.

[–] Bluewing@lemmy.world 5 points 1 day ago

Man, I got shop drawings of steam engines I know I will never build. The problem is I just like opening them up and looking at them. They are my precious.

[–] Bluewing@lemmy.world 0 points 1 day ago

You can't do too much and expect to be successful. Let's just start with þ to get everyone used to it. Remember, things like Þis can take 100 years or more to be permanent.

[–] Bluewing@lemmy.world 4 points 2 days ago

Even after 40 years, I still can't even get the bloody things on right according to my wife. So we fold them and put them on together.

[–] Bluewing@lemmy.world 4 points 2 days ago

The cheap Russian stuff was and still is lacquered steel cases. They had to do that to prevent rust. And it will coat a gun's chamber when the barrel heats up after a few shots. Most shooters don't clean their guns immediately to remove the lacquer buildup after shooting stops. So the lacquer hardens and becomes almost impossible to remove without a jackhammer. It can be a beeotch to remove after it hardens. In the west we don't use lacquer, we plate the cases with a thin coat of brass or sometimes nickel.

Almost all shot shells are now steel rimmed bases with a coating of brass.

[–] Bluewing@lemmy.world 6 points 2 days ago (2 children)

Þ is þe coolest

[–] Bluewing@lemmy.world 8 points 2 days ago (3 children)

You can keep all the rest. I just want Þ (thorn). It represents þe "th" sound in English. Gimmie!!!!!

 

We had a fun storm last night. An estimated 60mph/100kph straight line winds and heavy rain. It was amazing just how much you notice a wind storm like that even in the middle of the forest. The rain was nearly horizontal coming through the yard. Even though it rained like a cow pissin' on a flat rock, I have no idea of what the rainfall was. Because you don’t get much rain in the guage when it’s nearly horizontal.

Anyway, the power was also out from about 6:30ish pm to 4am this morning. But the boys from our electric co-op (all 6 of them) must have busted their balls all night to get things running again.

And now there is a heat advisory for today and tomorrow. Highs in the mid 80s and the wet bulb is at 80. The AC is going to get a real workout today.

 

Believe it or not, there is a mile long island a half mile away, and it cannot be seen due to forest fire smoke. The Air Quality index is currently at 1650. It is considered unsafe for anyone to be outdoors now. And I can even smell the smoke inside the house now. There are no birbs flying around the yard and not even insects are in the air.

Usually, we can blame forest fire smoke on Canada, I do live quite close to the border. But this year, it's our own forests that are on fire. I'm about 150 miles west of the fires and the smoke caught up with us yesterday and has just gotten worse and will remain so until the fires are put out I think.

Kind of makes me glad I'm waiting on knee surgery next week and can't walk well enough to be out and about wandering the forest.

 

The yellow and white clover, along with the odd wild daisy, are blooming in my yard! So no mowing for another week or two.

I can sit in Grandma's Hootch and drink tea while looking at pretty flowers and the lake. It reminds me of a little mountain valley.

All the while knowing that in 10 or twelve weeks it will all be covered in snow again.

 

The beet crop is growing nicely. But we remain vigilant against the deer. Despite their best efforts, the string beans are holding their front. And have been reported as growing back. I have 7 nice peppers and some tiny tomatoes are appearing.

There has been ongoing discussions about investing in a paintball gun to repel the bandits. Scouting, has reported that 2 fawns have been sighted and added to the gang. But no firm consensus been reached or decision made by upper management. We may need to wait for the inevitable assault on the flowers. By then I fear it will be too late.

Report from the Northern front July 1 2026

 

I have spent parts of the last 2 days trying to finish calibrating a hardened stainless steel .60mm nozzle with Sunlu PLA+ 2.0 filament.

I have been trying to print a test cube and I couldn't get the first layer to stick period. I washed plates, I swapped plates, I removed the nozzle and reinstalled it.

I swapped different filament brands, and they all printed flawlessly. Try that Sunlu white PLA and instant failure again. I was about ready to admit defeat and dry my first spool of PLA ever because I could think of nothing else to do.

But I took one last look at my settings for this filament. And I finally noticed my flow ratio was set at .096 rather than .96. I didn't even know the slicer would allow a number that small.

Once again the error was found to be located between the chair and the screen.........

 

I had to water my planters due to the mere sprinkle of rain last night. So I took the time to much between the rows of my string beans and beets.

 

I used to be a Medic and Firefighter-- in short I was an adrenaline junkie. And now I'm old and retired. And my body is bent and currently a bit broken. I seek to learn how to be dull.

Despite the enjoyment of watching the hummingbirds at my feeders and the light gardening I do. I still think I could become even more satisfied with my dullness.

Guide me to complete dullness!

 

Get it while it's hot! New goodies to use and an improved UI for users.

 

The Nap Train rollin' on a Saturday afternoon

 

Discuss: How big of a disruption of the printer market is the H2 series printers going to be?

5
The Electric Amish (www.youtube.com)
submitted 1 year ago* (last edited 1 year ago) by Bluewing@lemmy.world to c/music@lemmy.world
 

An Electric Amish original-- Gimmie Three Pigs

view more: next ›