32
Bambu Regrets (lemmy.world)

I won a bambu as a gift because I had a chinese printer that never worked and wanted something easy and "dumb friendly" no more days amd days looking up a problem. Well mine came with a problem and after 12 HOURS i still wasn't able to load a filament. Reading about bambu support I realized I was going to spend a REALLY long time and they wouldn't fix it so I just returned for a full refund. I'm very frustrated and almost giving up 3d printing all together because it's the second defective printer I get.

you are viewing a single comment's thread
view the rest of the comments
[-] scallisto@retrofed.com 1 points 8 hours ago* (last edited 8 hours ago)

If you do want to start 3D printing, I would highly recommend avoiding Bambu, as somebody who has an A1, since they locked down their software to prevent third-party software, accessories, and other bits from working without enabling some stupid "developer LAN only mode". They have also been very aggressive against small open-source projects (see fork of OrcaSlicer being attacked), despite their own slicer software being a fork of a fork. I do not recommend Bambu printers any more, especially since the competition has gotten very good. Bambu printers are no longer the best option, and they do not "just work" as some people suggest

Want something that is excellent value? The Elegoo Centauri Carbon is awesome and has an enclosure AND CoreXY (faster and more reliable prints), while the A1 I have has neither. You want something high performance? The Prusa Core One is more reliable than similarly priced Bambu machines, is manufactured in Czechia 🇨🇿, and super repairable too. Plus, it is CoreXY, and supports multi-material and has an optional toolchanger add-on too! If you want a very good value toolchanger? The Snapmaker U1 is cheaper than both Bambu and Prusa with a toolchanger + they use a variant of OrcaSlicer as their slicer software (turns out you don't have to be a dick to the open source community to make a good 3D printer!)

this post was submitted on 19 Nov 2026
32 points (90.0% liked)

3DPrinting

24361 readers
126 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 3 years ago
MODERATORS