Aotearoa / New Zealand

1658 readers

8 users here now

Kia ora and welcome to !newzealand, a place to share and discuss anything about Aotearoa in general

For politics , please use !politics@lemmy.nz
Shitposts, circlejerks, memes, and non-NZ topics belong in !offtopic@lemmy.nz
If you need help using Lemmy.nz, go to !support@lemmy.nz
NZ regional and special interest communities

Rules:

Don't be a dick

FAQ ~ NZ Community List ~ Join Matrix chatroom

Banner image by Bernard Spragg

Got an idea for next month's banner?

founded 2 years ago

MODERATORS

Dave

RaoulDuke

We've got an insulated house, heat it properly, ventilate it, but still see humidity levels of 70%+ in bed rooms. How to fix that? (self.newzealand)

submitted 1 year ago by sylverstream to c/newzealand

95 comments fedilink hide all child comments

We built a house 7 years ago and it's insulated and has double glazing. I've installed Home Assistant with temp sensors in the bed rooms and seeing 70%+ humidity levels. Temperature is always above 16c

We ventilate it, but still it's 70% in the bedrooms. WHO recommends 40-60%, so we're a bit worried.

Living room is around 55% during the day when we have the heat pump set at 21c.

As it's pretty humid outside I think it's almost impossible to get it lower, but are there any other tips? I don't want to run dehumidifiers. Would an HRV like system help?

you are viewing a single comment's thread
view the rest of the comments

[–] innercitadel 3 points 1 year ago (1 children)

Positive pressure is definitely not as good. But if you plan ahead you can always modify into a balanced system later. In my last house when I installed positive pressure I also added an additional vent in the soffit in case I wanted to turn it into a balanced system in the future. But the positive pressure solved the condensation problem so didn't end up upgrading to balanced. You could also do balanced without mechanical heat recovery.

Maybe as an experiment try blow a fan pointed out an open window and see if it makes any difference to the humidity?

[–] sylverstream 1 points 1 year ago (1 children)

Thanks again for all the tips, much appreciated! I learn more and more about it.

Yes, will try the fan.

What type of system did you install? Just a simple fan or a more sophisticated one? If you want to be ready for balanced I guess your fan needs to be ready as well?

[–] innercitadel 2 points 1 year ago

I installed ducted air con and instead of having a separate system for ventilation, for cost effectiveness I routed it from the outside through the air con system. So the aircon pulled the air from both the return vent in the house (90%) and from the outside (10%). You only need a small amount of mechanical airflow from the outside to reduce moisture levels. And had another vent hole with cover on the soffit for future but not ducted into the air con.