this post was submitted on 15 Jan 2024
8 points (100.0% liked)

3DPrinting

15679 readers
85 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee
8
Prusa MK4 with enclosure filament feeding (lemmy.world)
submitted 10 months ago by ArtVandelay@lemmy.world to c/3dprinting@lemmy.world
6 comments fedilink hide all child comments
 

I'm contemplating a Prusa MK4 + official enclosure and I'm looking at the way the enclosure handles filament feeding into the (N)extruder. Normally, filament is loaded directly from the spool into the extruder, but with the official enclosure, I see it's fed through a PTFE tube and coupler. It seems to me this would make changing filaments mid print quite a pain. Would I be ok simply feeding the filament into a PTFE tube, but cutting it way short of the extruder and simply feeding it in from there into the extruder without the tube?

top 6 comments
sorted by: hot top controversial new old
[–] ShepherdPie@midwest.social 2 points 10 months ago* (last edited 10 months ago)

You could instead drill a hole in the top and then feed the filament through a filament sensor screwed to the inside ceiling. I think you just need something to handle the side to side forces. There's no need for PTFE all the way to a direct drive extruder.

[–] bluewing@lemm.ee 2 points 10 months ago (1 children)

I have an old Mk3s that's been living in a Lack enclosure for almost 5 years now. Back in those days, all enclosures were DYI affairs and the Lack was cheap, easy to build and works.

I have always fed the filament down directly through the top of the enclosure through a "trumpet" that is inserted through the table top. No PTFE tube required or wanted. Something like this is what I use: https://www.printables.com/model/233868-lack-enclosure-filament-grommet Slot style inserts seem to be the rage these days, but I haven't been tempted to switch.

So, unless the Nextruder isn't as good as the old Mk3 extruders, I'm pretty sure you don't need the PTFE tube. Just feed it directly to the top of the extruder as if the enclosure isn't there.

[–] ArtVandelay@lemmy.world 1 points 10 months ago

Thanks, that's exactly what I was looking for

[–] FailBait@lemmy.world 1 points 10 months ago (1 children)

So one thing I’ve discovered is you can’t have ANY resistance on the spool when the printer is homing. If the filament goes taught as the extruder moves down, it thinks the nozzle moved up and thinks it has a homing error.

[–] ArtVandelay@lemmy.world 1 points 10 months ago

Thanks, whatever I design I'll keep that in mind

[–] tagginator@utter.online -3 points 10 months ago

New Lemmy Post: Prusa MK4 with enclosure filament feeding (https://lemmy.world/post/10756899)
Tagging: #3dprinting

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md