32
Bambu Regrets (lemmy.world)

I won a bambu as a gift because I had a chinese printer that never worked and wanted something easy and "dumb friendly" no more days amd days looking up a problem. Well mine came with a problem and after 12 HOURS i still wasn't able to load a filament. Reading about bambu support I realized I was going to spend a REALLY long time and they wouldn't fix it so I just returned for a full refund. I'm very frustrated and almost giving up 3d printing all together because it's the second defective printer I get.

you are viewing a single comment's thread
view the rest of the comments
[-] Rhaedas@fedia.io 2 points 12 hours ago

Thanks for the mention. I'm not into 3D printing yet, but had looked around to get familiar with things and was going to settle for a single color type since the whole poop thing seems ridiculous if you can't easily capture that waste back. Looking at this one, it makes sense to spend a bit more to get multiple heads to do different colors and material at once. Imagine if color printing on paper had you spit out a bunch of one color into the trash to switch to a new one.

[-] CmdrShepard49@sh.itjust.works 1 points 8 hours ago

since the whole poop thing seems ridiculous if you can't easily capture that waste back

Its not as bad as you think especially when you're comparing them to lower quality printers that cause you to throw a bunch of half finished prints in the trash due to print errors. You can also avoid this if you use/make models that have the colored parts split out so you're only printing one color at a time, or minimize waste by printing multiples of whatever multicolored object you're printing. The waste is the same whether you're printing 1 or 50.

Some prints its unavoidable, but I certainly feel like I've wasted way less plastic with my Bambu printers than I did with the bed slinger I had before it.

Multiple toolheads are probably the better way to go but these introduce their own issues and can lead to print failures as well since they're way more complex than a single toolhead.

[-] SaveTheTuaHawk@lemmy.ca 2 points 11 hours ago

multiple toolhead printers still use a purge tower which is waste.

[-] CIA_chatbot@lemmy.world 1 points 10 hours ago

I usually purge into the fill and support, and the poop is almost non-existent

this post was submitted on 19 Nov 2026
32 points (90.0% liked)

3DPrinting

24361 readers
118 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 3 years ago
MODERATORS