view the rest of the comments
3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
Agreed, I've had to strip my toolhead down due to my own impatience with a clog and it takes like 15 minutes at most. PTFE to filament sensor to hot-end is the entire filament path so what took 12 hours of work without even leaving this user with an idea of what the issue was?
I feel a bit of this is happening here: XKCD: "Average Familiarity". Most people who aren't very familiar with the ins and outs will likely look at what you'd said and not instinctively be able to follow along. If your hobby is printing, its fair to say you know a lot, but if your printing is just a means to supplement another hobby, you might not have doven deep enough into research to know all of it.
Having to troubleshoot a system you're unfamiliar with and new to is complicated. The diagnosis step can feel monumental when you don't know how every component functions in relation to what else. Pair that with a cheap entry-level printer, and it's what made my first experiences with 3D printing reeealy drawn out to the point I'd given up multiple times. When OP says they spent 12 hours working on it, I gotta say, I really believe it.