583
Expanding my laptops HDD capacity (lemmy.nz)
submitted 1 month ago by BarHocker@discuss.tchncs.de to c/selfhosted@lemmy.world
70 comments fedilink hide all child comments

cross-posted from: https://discuss.tchncs.de/post/66988984

What I have

I have an old Acer Aspire A515-51G and I also have a desire to have a home server. In combination this creates a need for the laptop to carry more HDDs than it can from factory. Usually it can take one M.2 SSD and one 2.5" SATA drive.

What I want

I want to make the laptop able to run at least 4 HDDs in RAID 5 for storage and have one SSD as boot drive.

What I did

The buying phase

  • 4 HDDs
  • M.2 to SATA adapter
  • 12V/5V SATA power converter
  • 12V 10A power supply

The designing phase

I needed space to hold the HDDs, so I designed a 3D printed a cage to attach to the bottom of my laptop. Two 80mm fans can be attach to it. You can see it on printables. Also I remixed a tray (here is the original) so the HDDs can slide in and out of the cage.

.

The assembly phase

A cutout at the bottom of the laptop was needed to give access to the SATA ports of the adapter.

I put a 2.5" SSD into the already present place for it in the laptop.

Then the cage was attached to the laptop, the HDDs were put in their trays, the trays inside the cage and the cables attached to the adapter and HDDs.

top 50 comments
sorted by: hot top new old
[-] doctorflynt@feddit.org 112 points 1 month ago

this is cursed and i love it

[-] cRazi_man@europe.pub 59 points 1 month ago* (last edited 1 month ago)

Excellent hack.

In case you're a masochist like me and want a lot more work on your hands, then you could remove the whole laptop mobo and make its own case and make it more compact in the process.

I've done this recently to make a standalone machine out of a busted laptop. This can give you a single, more compact unit with all the parts inside. You can improve the cooling and noise too (by using desktop fans). You'll maintain your laptop resale value too by not destroying the case and being able to put the mobo back in place in the future. Infact, with today's ram prices, the reason I went down this route is because you can get broken laptops with soldered in DDR5 ram.

[-] djdarren@piefed.social 12 points 1 month ago

I've been pondering doing this to a broken iMac I've got.

It got donated to me by someone who needed to thin out his studio a bit, so it didn't cost me a penny. But I took the screen off to give it a clean out and repaste, apparently didn't tape it in place securely enough as a temporary measure, so the screen fell off. And smashed.

I did some swearing.

However, it's still a surprisingly handy spec. 3.5ghz i5, 24gb RAM and a Radeon GPU. So I've been wondering about pulling the guts and turning it into a desktop, then making it my home server to replace the 2014 Mac mini I currently use.

ponderings intensify

[-] cRazi_man@europe.pub 5 points 1 month ago

Watch this guy's video. He DIY restores a smashed iMac screen: https://www.youtube.com/watch?v=7FStfdGjAwc

[-] HeyThisIsntTheYMCA@lemmy.world 5 points 1 month ago

This can give you a single, more compact unit with all the parts inside.

what if i want a multiplex, larger unit with several parts outside? can this help me accomplish that too?

[-] cRazi_man@europe.pub 4 points 1 month ago

Since this is DIY, you can fuck it up as badly as you want. The possibilities are endless!

load more comments (1 replies)
[-] curbstickle@anarchist.nexus 4 points 1 month ago* (last edited 1 month ago)

I've gone this route! Anything with a busted screen is fair game to me, though I haven't picked up any recently, mostly just tiny/mini/micros (and heavy on the lenovo tiny).

But a custom hacked up laptop can be a great option especially with tight space to work with

Edit: I'm surprised I missed your original post! I did the same, though what I reused was first a lenovo tiny, more recently updated with a digital signage player I picked up that I swapped parts out on - way more fun than a standard console imo!

[-] Postmortal_Pop@lemmy.world 2 points 1 month ago

I've literally been considering exactly this for a media center. I already have a server built put of an old tower, but it's got limited specs and I don't want to bog down the other stuff running a gui and all that.

load more comments (1 replies)
[-] Aqivex@fedinsfw.app 49 points 1 month ago

This post is cursed.

Not because of the insane jank, of course. That's on brand for self host and I love it.

It is cursed because it has awakened something in me, and I can feel every old laptop in my vicinity trembling in fear.

[-] kryptonianCodeMonkey@lemmy.world 39 points 1 month ago* (last edited 1 month ago)

The fact that there exists an m.2 x6 port SATA adapter is the wildest part to me.

[-] Rai@lemmy.dbzer0.com 19 points 1 month ago

There’s a NINE PORT ONE! That’s bonkers!

[-] BarHocker@discuss.tchncs.de 6 points 1 month ago

I was also very happy to find out they exist, otherwise this whole thing would've been a no-starter.

[-] qaz@lemmy.world 2 points 1 month ago

I used one for my server. I'm quite happy with it

[-] CaptPretentious@lemmy.world 28 points 1 month ago

This is the type of stuff I love to see the most when it comes to PCs. This to me is far more impressive then someone with a standard case, with standard RGB fans, standard AIO RGB cooler...

This reminds me of stuff I did in college.

[-] horus_son_of_isis@lemmy.world 15 points 1 month ago

Next step is to free the acer from it's physical bonds and screw the motherboard to the 3D printed stand.

[-] kestrel7_7@lemmy.world 4 points 1 month ago

One could frame it and put it on the wall

[-] horus_son_of_isis@lemmy.world 4 points 1 month ago

if you wire up some blinky LEDs to the power supply, then yes. I NEEDS THEM BLINKYS

load more comments (1 replies)
[-] kettuli@lemmy.world 15 points 1 month ago

It’s beautiful.

[-] quick_snail@feddit.nl 11 points 1 month ago

I would love to watch a short documentary following you trying to take this on a plane

load more comments (1 replies)
[-] OR3X@lemmy.world 10 points 1 month ago

That's janky as hell, I love it.

[-] Ooops@feddit.org 9 points 1 month ago* (last edited 1 month ago)

I'm more irritated than I'd like to admit by the fact that there is no 12V to 6x SATA power converter going with that M.2 to 6x SATA adapter.

[-] BarHocker@discuss.tchncs.de 3 points 1 month ago

Also slightly bugging me, but I didn't find 6x SATA power. And my plan always was to use 4 drives.

[-] JangleJack@lemmy.world 3 points 1 month ago

Well, I just used a similar adapter in my tower to get more sata ports. M.2 is not just for laptops. Even my ancient mobo had a slot.

[-] fabse@feddit.org 9 points 1 month ago

❌ Fat Client

✅ Fattest Client

load more comments (1 replies)
[-] ThunderLegend@sh.itjust.works 9 points 1 month ago* (last edited 1 month ago)

How are powering them up.. Do you have a PSU behind the HDDs ?

Edit: never mind just saw the whole post

[-] ipkpjersi@lemmy.ml 8 points 1 month ago

That's scary looking but also really awesome.

[-] inari@piefed.zip 8 points 1 month ago

Maximum jank

[-] some_random_nick@lemmy.world 4 points 1 month ago

As the selfhosting gods intended

[-] Lucidlethargy@sh.itjust.works 7 points 1 month ago

Lol, cause who wants to use a single USB to interface with the laptop? That's crazy.

[-] HeyThisIsntTheYMCA@lemmy.world 7 points 1 month ago

so what kind of looks did you get when you booted that up in the public library? how long before either (a) the cool librarian asked you how you did it or (b) the jerk librarian asked you not to burn down the library

[-] Redjard@reddthat.com 7 points 1 month ago

Hows the hdd cooling situation?

[-] BarHocker@discuss.tchncs.de 9 points 1 month ago

If you look carefully at the pictures, there are 80mm fans attached to the cage.

[-] Redjard@reddthat.com 4 points 1 month ago

Oh true. And some gap between the disks? Or is it sufficient as is?

[-] BarHocker@discuss.tchncs.de 4 points 1 month ago

Yeah there is a gap between the disks.

[-] prenatal_confusion@feddit.org 2 points 1 month ago

Honestly I ran 8HDD without cooling in a janky tower (panels of) for years and no fan whatsoever. Are still fine in my new build.

[-] kSPvhmTOlwvMd7Y7E@lemmy.world 6 points 1 month ago

i know a Bourgeois when i see one

[-] MonkeMischief@lemmy.today 6 points 1 month ago

Because they can afford hard disks? Lol

[-] ayyy@sh.itjust.works 5 points 1 month ago

Is the laptop cooling ok with the lid closed? Or do you crack it open when actually in use?

load more comments (1 replies)
[-] 9point6@lemmy.world 5 points 1 month ago

Part of me wonders what chipset is running that adapter, and if you'd get a better one if you went for a miniSAS adapter rather than individual sata ports (enterprise port generally implying a better controller chip)

Then realised there would probably be no use for such an adapter in enterprise so if you did get a different connector it would probably just be the same interface chip as whatever is in this.

[-] antsu@discuss.tchncs.de 4 points 1 month ago

Maximum respect!

[-] suff@piefed.social 4 points 1 month ago

Apropos! Has anyone extended their laptops memory by replacing its DVD drive?

My attempt failed when I bought a misgendered micro sata cable..

[-] Rai@lemmy.dbzer0.com 6 points 1 month ago

I ripped out my old MacBook pro’s DVD burner and installed an SSD, now it has a 512GB SSD and a 1TB HDD!

I should install Linux on it…

[-] jobbies@lemmy.zip 4 points 1 month ago

Modern problems require modern solutions.

[-] architect@thelemmy.club 3 points 1 month ago

Hot

[-] Rolive@discuss.tchncs.de 2 points 1 month ago

Nice work! I'm considering a similar project and this looks like a good way to do it.

[-] napkin2020@sh.itjust.works 2 points 1 month ago

What

load more comments (1 replies)
load more comments
view more: next ›
this post was submitted on 03 Sep 2026
583 points (99.2% liked)

Selfhosted

62801 readers
829 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

Detailed Rules Post

  1. Be civil.

  2. No spam.

  3. Posts are to be related to self-hosting.

  4. Don't duplicate the full text of your blog or readme if you're providing a link.

  5. Submission headline should match the article title.

  6. No trolling.

  7. Promotion posts require active participation, with an account that is at least 30 days old. F/LOSS without a paywall has exceptions, with requirements. See the rules link for details. Tags [CBH] or [AIP] are required, see the links in Rule 8 for details.

  8. AI-related discussions and AI-involved promotional posts have additional requirements for tagging, as noted in Rule 7 and the AI & Promotional Post Expanded Rules post, and find example disclosures here.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 3 years ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
ayyy@sh.itjust.works
curbstickle@anarchist.nexus
curbstickle_lw@lemmy.world